INSTALLATION PROCEDURE 1. INSTALL RADIATOR GRILLE SUB-ASSEMBLY (a) Attach the 4 claws and 3 clips to install the radiator grille sub-assembly. (b) Install the 4 screws and 2 clips. (c) w/ Toyota Safety Sense P: (1) Connect the millimeter wave radar sensor connector. 2. INSTALL RADIATOR SIDE GRILLE LH (a) Attach the 2 claws and 3 guides to install the radiator side grille LH. |
Toyota Tundra Service Manual > Touch Select 2-4 And High-low System: Transfer Synchronization Actuator Circuit High (P17A7)
DESCRIPTION This DTC is detected when a short to B+ is detected in the solenoid coil drive circuit. DTC Code DTC Detection Condition Diagnosis Condition Malfunction Status Malfunction Time Other Trouble Area P17A7 Ignition switch ON (when not switching between 2WD and 4H) Short to B+ in the solenoid ...
