Components COMPONENTS ILLUSTRATION 
ILLUSTRATION 
Installation INSTALLATION PROCEDURE 1. INSTALL REAR BODY SIDE PANEL PROTECTOR LH (a) for Double Cab: (1) Install the rear body protector plate. (2) Attach the 24 clips to install the rear body side panel protector LH. 
(b) for CrewMax: (1) Attach the 20 clips to install the rear body side panel protector LH. 
2. INSTALL REAR BODY SIDE PANEL PROTECTOR RH HINT: Use the same procedure described for the LH side. Removal REMOVAL PROCEDURE 1. REMOVE REAR BODY SIDE PANEL PROTECTOR LH (a) for Double Cab: (1) Put protective tape around the rear body side panel protector LH. (2) Using moulding remover D, detach the 24 clips and remove the rear body side panel protector LH. (3) Remove the rear body protector plate.  Text in Illustration
(b) for CrewMax: (1) Put protective tape around the rear body side panel protector LH. (2) Using moulding remover D, detach the 20 clips and remove the rear body side panel protector LH.  Text in Illustration
2. REMOVE REAR BODY SIDE PANEL PROTECTOR RH HINT: Use the same procedure described for the LH side. |
Toyota Tundra Service Manual > Headlight Assembly(for Led Headlight): Adjustment
ADJUSTMENT CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. It is possible that a headlight assembly is incorrectly installed, affecting headlight aim. Headlight assembly installation should be considered prior to performing ...
