Toyota Tundra Service Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE REAR BUMPER PLATE LH

(a) Detach the 3 claws and clip and remove the rear bumper plate LH.

2. REMOVE REAR BUMPER PLATE RH

HINT:

Use the same procedure described for the LH side.

3. REMOVE REAR BUMPER PAD SUB-ASSEMBLY LH

(a) Remove the 3 clips.

(b) Detach the 12 claws and 2 guides and remove the rear bumper pad sub-assembly LH as shown in the illustration.

4. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH

5. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

6. REMOVE REAR BUMPER BAR CORNER REINFORCEMENT LH

(a) Remove the 5 bolts and rear bumper bar corner reinforcement LH.

7. REMOVE REAR BUMPER BAR CORNER REINFORCEMENT RH

HINT:

Use the same procedure described for the LH side.

8. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

9. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

10. REMOVE NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

11. REMOVE NO. 2 FRAME WIRE

(a) w/ Towing Package:

(1) Detach all the clamps and remove the No. 2 frame wire from the receiver hitch bracket sub-assembly.

Text in Illustration

*A

w/ Intuitive Parking Assist System

*B

w/o Intuitive Parking Assist System

(b) w/o Towing Package:

(1) Detach all the clamps and remove the No. 2 frame wire from the rear bumper reinforcement sub-assembly.

Text in Illustration

*A

w/ Intuitive Parking Assist System

*B

w/o Intuitive Parking Assist System

12. REMOVE REAR BUMPER PLATE

(a) Remove the 2 bolts and rear bumper plate.

Text in Illustration

*A

w/ Towing Package

*B

w/o Towing Package

13. REMOVE REAR BUMPER BAR LH

(a) Remove the 5 bolts and rear bumper bar LH.

14. REMOVE REAR BUMPER BAR RH

HINT:

Use the same procedure described for the LH side.

15. REMOVE REAR BUMPER UPPER COVER LH

(a) Remove the 2 nuts and rear bumper upper cover LH.

16. REMOVE REAR BUMPER UPPER COVER RH

HINT:

Use the same procedure described for the LH side.

    Components

    Installation

    See More:

    Toyota Tundra Service Manual > Propeller Shaft Assembly(for 2wd): Installation
    INSTALLATION PROCEDURE 1. MEASURE EXTENSION HOUSING AND DIFFERENTIAL FLANGE ANGLE NOTICE: Perform the inspection on a level surface. Perform the inspection with the vehicle empty. Perform the inspection with all wheels on the ground. HINT: As the extension housing and rear differential flange angles ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0193