Toyota Tundra Service Manual: Overhead Console Box

Components

COMPONENTS

ILLUSTRATION

Installation

INSTALLATION

PROCEDURE

1. INSTALL ROOF CONSOLE BOX ASSEMBLY

(a) Connect the connector.

(b) Using a T20 "TORX" driver, install the roof console box assembly with the 4 "TORX" screws.

(c) Attach the 8 claws to install the roof console box base.

Removal

REMOVAL

PROCEDURE

1. REMOVE ROOF CONSOLE BOX ASSEMBLY

(a) Apply protective tape as shown in the illustration.

Text in Illustration

*1

Protective Tape

(b) Using a screwdriver, detach the 8 claws and remove the roof console box base.

HINT:

Tape the screwdriver tip before use.

(c) Using a T20 "TORX" driver, remove the 4 "TORX" screws and remove the roof console box assembly.

(d) Disconnect the connector.

    Interior

    Roof Headlining(for Crewmax)

    See More:

    Toyota Tundra Service Manual > Lighting System: Hazard Warning Switch Circuit
    DESCRIPTION The combination meter assembly receives the air conditioning control assembly (hazard warning signal switch) ON signal and controls the operation of the hazard warning lights. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: When replacing the combination meter assembly, always replace it ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0119