Toyota Tundra Service Manual: Illumination for Panel Switch does not Come on with Tail Switch ON

Toyota Tundra Service Manual / Audio, Visual, Telematics / Audio / Video / Audio And Visual System / Illumination for Panel Switch does not Come on with Tail Switch ON

PROCEDURE

1.

CHECK VEHICLE SIGNAL (OPERATION CHECK)

(a) Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (See page )]

(b) Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation.

OK:

Light Control Switch

Display

Tail or head

ON

Off

OFF

HINT:

This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.

Result

Result

Proceed to

OK (for Column Shift Type)

A

OK (for Floor Shift Type)

B

NG

C

A

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

C

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Illumination Circuit

    Microphone Circuit between Microphone and Radio Receiver

    See More:

    Toyota Tundra Service Manual > Valve Body Assembly: Components
    COMPONENTS ILLUSTRATION *1 AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY *2 TRANSMISSION VALVE BODY ASSEMBLY *3 TRANSMISSION WIRE *4 VALVE BODY OIL STRAINER ASSEMBLY *5 SPRING *6 CHECK BALL BODY *7 TEMPERATURE SENSOR CLAMP *8 DETENT SPRING *9 DETENT SPRING COVER *10 GASKET *11 OVERFLOW PLUG *12 DRAIN ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0179