Toyota Tundra Service Manual: Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT DOOR SCUFF PLATE LH

for Double Cab:

(See page )

for CrewMax:

(See page )

2. REMOVE COWL SIDE TRIM BOARD LH

3. REMOVE INSTRUMENT SIDE PANEL LH

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

5. REMOVE DECK LIGHT SWITCH ASSEMBLY

(a) Using a screwdriver, detach the 2 claws and remove the deck light switch assembly.

HINT:

Tape the screwdriver tip before use.

Text in Illustration

Protective Tape

    Installation

    Daytime Running Light Relay

    See More:

    Toyota Tundra Service Manual > Sfi System: Oxygen (A/F) Sensor Signal Stuck Lean (Bank 1 Sensor 1) (P2195-P2198)
    DESCRIPTION The A/F sensor generates a voltage* that corresponds to the actual air-fuel ratio. This sensor voltage is used to provide the ECM with feedback so that it can control the air-fuel ratio. The ECM determines the deviation from the stoichiometric air-fuel ratio, and regulates the fuel injec ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0334