Components COMPONENTS ILLUSTRATION
ILLUSTRATION
Inspection INSPECTION PROCEDURE 1. INSPECT FRONT DOOR COURTESY SWITCH (a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the front door courtesy switch. Text in Illustration
Installation INSTALLATION CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. INSTALL FRONT DOOR COURTESY SWITCH (a) Connect the connector. (b) Using a T30 "TORX" socket wrench, install the front door courtesy switch with the screw. Removal REMOVAL CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. REMOVE FRONT DOOR COURTESY SWITCH (a) Using a T30 "TORX" socket wrench, remove the screw. (b) Disconnect the connector and remove the front door courtesy switch. |
Toyota Tundra Service Manual > Sfi System: Check For Intermittent Problems
CHECK FOR INTERMITTENT PROBLEMS HINT: Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with the Techstream when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), whic ...