Toyota Tundra Service Manual: Reassembly

REASSEMBLY

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL FRONT SIDE MARKER LIGHT BULB

(a) Install the front side marker light bulb to the front side marker light bulb socket.

(b) Turn the front side marker light bulb socket with the front side marker light bulb in the direction indicated by the arrow to install them as a unit.

2. INSTALL FRONT TURN SIGNAL LIGHT BULB

(a) Install the front turn signal light bulb to the front turn signal light bulb socket.

(b) Turn the front turn signal light bulb socket with the front turn signal light bulb in the direction indicated by the arrow to install them as a unit.

3. INSTALL NO. 1 HEADLIGHT BULB

(a) Set the No. 1 headlight bulb to the headlight unit LH.

(b) Lock the set spring to install the No. 1 headlight bulb to the headlight unit LH.

NOTICE:

Do not touch the No. 1 headlight bulb glass.

(c) Install the No. 1 headlight bulb cover.

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Camshaft Oil Control Valve: Inspection
    INSPECTION PROCEDURE 1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 6.9 to 7.9 Ω If the result is not as specified, replace the ca ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2022 Copyright www.ttundra.com
    0.0053