Toyota Tundra Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.
  • A bolt without a torque specification is shown in the standard bolt chart (See page ).

PROCEDURE

1. INSTALL HEADLIGHT ASSEMBLY LH

(a) Connect each connector and attach each clamp.

(b) Attach the guide to set the headlight assembly LH.

(c) Install the bolt and 2 screws.

2. INSTALL FRONT END PANEL LH

3. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

4. ADJUST HEADLIGHT AIMING

(See page )

    Inspection

    Reassembly

    See More:

    Toyota Tundra Service Manual > Park / Neutral Position Switch: Adjustment
    ADJUSTMENT PROCEDURE 1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY (a) Loosen the bolt of the park/neutral position switch and move the shift lever to N. (b) Align the groove with the neutral basic line. (c) Hold the switch in position and tighten the bolt. Torque: 13 N·m {130 kgf·cm, 9 ft·lbf} ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0112