REMOVAL PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ). 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ). 3. REMOVE SPIRAL CABLE SUB-ASSEMBLY (See page ) 4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
5. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY (a) Disconnect the connector. (b) While loosening the band clamp as shown in the illustration, detach the claw. Text in Illustration
(c) Remove the headlight dimmer switch assembly. NOTICE: If the claw is pressed forcefully, it will break. Text in Illustration
|
Toyota Tundra Service Manual > Power Mirror Control System(w/ Memory): Power Mirror cannot be Adjusted with Power Mirror Switch
DESCRIPTION When the outer mirror switch assembly (mirror master switch) is operated, right/left selection signals are sent to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) sends the received right/left selection signals to the outer mirror control EC ...