Toyota Tundra Service Manual: Inspection

Toyota Tundra Service Manual / Vehicle Interior / Lighting / High Beam Main Switch / Inspection

INSPECTION

PROCEDURE

1. INSPECT AUTO HIGH BEAM SWITCH

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition
If the result is not as specified, replace the auto high beam switch.

6(+B) - (E)

Auto high beam switch ON

Below 1 Ω

Auto high beam switch OFF

10 kΩ or higher
Text in Illustration

*a

Component without harness connected

(Auto High Beam Switch)

(b) Check the illumination.

(1) Apply battery voltage to the connector and check the illumination condition.

OK:

Battery Connection

Specified Condition
If the result is not as specified, replace the auto high beam switch.

Positive (+) → 5(ILL+)

Negative (-) → 4(ILL-)

Illuminates
Text in Illustration

*a

Component without harness connected

(Auto High Beam Switch)
    Components

    Installation

    See More:

    Toyota Tundra Service Manual > Can Communication System: System Description
    SYSTEM DESCRIPTION 1. BRIEF DESCRIPTION (a) The Controller Area Network (CAN) is a serial data communication system for real time application. It is a vehicle multiplex communication system which has a high communication speed and the ability to detect malfunctions. (b) Using the CANH and CANL bus l ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0263