Toyota Tundra Service Manual: High Mounted Stop Light Assembly

Toyota Tundra Service Manual / Vehicle Interior / Lighting / High Mounted Stop Light Assembly

Components

COMPONENTS

ILLUSTRATION

ILLUSTRATION

Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE CENTER STOP LIGHT BULB

(a) Turn the center stop light bulb sockets with the center stop light bulb in the direction indicated by the arrow to remove them as a unit.

(b) Remove the center stop light bulb from the center stop light bulb socket.

2. REMOVE CENTER STOP LIGHT SOCKET AND WIRE

(a) Remove the center stop light socket and wire from the center stop light.

3. REMOVE CENTER STOP LIGHT LENS

(a) Remove the 4 screws and center stop light lens.

(b) Remove the center stop light lens gasket.

Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See page ).

PROCEDURE

1. INSTALL CENTER STOP LIGHT GASKET

(a) Install a new center stop light gasket.

2. INSTALL CENTER STOP LIGHT ASSEMBLY

(a) Connect the connector and attach the clamp.

(b) Install the center stop light assembly with the 2 nuts.

3. INSTALL ROOF HEADLINING ASSEMBLY

for Double Cab:

(See page ).

for CrewMax:

(See page )

Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL CENTER STOP LIGHT LENS

(a) Install a new center stop light lens gasket.

(b) Install the center stop light lens with the 4 screws.

2. INSTALL CENTER STOP LIGHT SOCKET AND WIRE

(a) Install the center stop light socket and wire to the center stop light.

3. INSTALL CENTER STOP LIGHT BULB

(a) Install the center stop light bulb to the center stop light bulb socket.

(b) Turn the center stop light bulb sockets with the center stop light bulb in the direction indicated by the arrow to install them as a unit.

Removal

REMOVAL

PROCEDURE

1. REMOVE ROOF HEADLINING ASSEMBLY

for Double Cab:

(See page )

for CrewMax:

(See page )

2. REMOVE CENTER STOP LIGHT ASSEMBLY

(a) Remove the 2 nuts.

(b) Disconnect the connector and detach the clamp and remove the center stop light assembly.

3. REMOVE CENTER STOP LIGHT GASKET

(a) Remove the center stop light gasket.

    Removal

    Ignition Key Cylinder Light

    See More:

    Toyota Tundra Service Manual > Back Window Glass(for Crewmax): Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: A bolt without a torque specification is shown in the standard bolt chart (see page ). PROCEDURE 1. INSTALL UPPER CAB REAR PILLAR PLATE LH (a) Align the positioning hole with the claw, and install the upper plate with the 4 bolts as shown in the illustratio ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.029