Toyota Tundra Service Manual: Panel Switches do not Function

Toyota Tundra Service Manual / Audio, Visual, Telematics / Audio / Video / Audio And Visual System / Panel Switches do not Function

CAUTION / NOTICE / HINT

NOTICE:

After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).

PROCEDURE

1.

CHECK PANEL SWITCH

(a) Check for foreign matter on the display.

OK:

The display is clean.

NG

REMOVE ANY FOREIGN MATTER FOUND
OK

2.

CHECK PANEL SWITCH (OPERATION CHECK)

(a) Enter the "Panel & Steering Switch Check Mode" screen. [Refer to Check Panel & Steering Switch in Operation Check (See page )]

(b) Operate the abnormal switch and check if the switch status is correctly displayed.

OK:

The switch status is correctly displayed as operated.

Result

Result

Proceed to

OK (for Column Shift Type)

A

OK (for Floor Shift Type)

B

NG

C
A

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

C

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Operation Check

    Parking Brake Switch Circuit

    See More:

    Toyota Tundra Service Manual > Steering Column Assembly(for Power Tilt And Power Telescopic Steering Column): Installation
    INSTALLATION PROCEDURE 1. INSTALL STEERING COLUMN ASSEMBLY (a) Install the steering column with the bolt and 2 nuts. Torque: 21 N·m {214 kgf·cm, 15 ft·lbf} 2. INSTALL NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY (a) Align the matchmarks on the No. 2 steering intermediate shaft and power steerin ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0305