Toyota Tundra Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart (See page ).

PROCEDURE

1. INSTALL REAR COMBINATION LIGHT GUIDE

HINT:

If the rear combination light assembly LH is removed, replace the rear combination light guide.
Use the same procedure for both rear combination light guides.

(a) Attach the 2 claws to install a new rear combination light guide.

2. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

(a) Put protective tape around the rear combination light assembly LH.

(b) Connect each connector.

(d) Using a T30 "TORX" socket wrench, install the 2 screws.

Text in Illustration

Protective Tape

Toyota Tundra Service Manual > Air Conditioning System(for Automatic Air Conditioning System): Air Outlet Damper Control Servo Motor Circuit (B1443/43)
DESCRIPTION The No. 1 damper servo sub-assembly (air outlet servo motor) sends pulse signals to inform the air conditioning amplifier of the damper position. The air conditioning amplifier activates the motor (normal, reverse) based on the signals to move the air outlet damper to any position, which ...

Toyota Tundra Owners Manual