REMOVAL CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH (a) Put protective tape around the rear combination light assembly LH. (b) Using a T30 "TORX" socket wrench, remove the 2 screws. (c) Detach the 2 clips. (d) Disconnect each connector and remove the rear combination light assembly LH. Text in Illustration
2. REMOVE REAR COMBINATION LIGHT GUIDE HINT:
(a) Using a screwdriver, detach the 2 claws and remove the rear combination light guide. HINT: Tape the screwdriver tip before use. Text in Illustration
|
Toyota Tundra Service Manual > Headlight Assembly(for Halogen Headlight): Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL FRONT SIDE MARKER LIGHT BULB (a) Install the front side marker light bulb to the front side marker light bulb socket. (b) Turn the front side m ...