Toyota Tundra Service Manual: Inspection

Toyota Tundra Service Manual / Vehicle Interior / Lighting / Room Light Switch / Inspection

INSPECTION

PROCEDURE

1. INSPECT INTERIOR ROOM LIGHT SWITCH ASSEMBLY

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

6 (FCTY) - 11 (FLMP)

Interior room light switch DOOR

Below 1 Ω

11 (FLMP) - 8 (E)

Interior room light switch ON

Below 1 Ω

If the result is not as specified, replace the interior room light switch assembly.

Text in Illustration

*a

Component without harness connected

(Interior Room Light Switch Assembly)

(b) Check the illumination.

(1) Apply battery voltage to the connector and check the illumination condition.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → Terminal 1 (ILL+)

Battery negative (-) → Terminal 4 (ILL-)

Illuminates

If the result is not as specified, replace the interior room light switch assembly.

Text in Illustration

*a

Component without harness connected

(Interior Room Light Switch Assembly)
    Components

    Installation

    See More:

    Toyota Tundra Service Manual > Oil And Oil Filter: Replacement
    REPLACEMENT CAUTION / NOTICE / HINT CAUTION: Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer. Pre ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0153