REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE LH (a) for Double Cab: Click here (b) for CrewMax: Click here 2. REMOVE COWL SIDE TRIM BOARD LH Click here 3. REMOVE INSTRUMENT SIDE PANEL LH Click here 4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Click here 5. REMOVE INTERIOR ROOM LIGHT SWITCH ASSEMBLY
(a) Using a screwdriver, detach the 2 claws and remove the interior room light switch assembly. HINT: Protective tape the screwdriver tip before use. |
Toyota Tundra Service Manual > 1ur-fe Emission Control: Pcv Valve
ComponentsCOMPONENTS ILLUSTRATION InspectionINSPECTION PROCEDURE 1. INSPECT PCV VALVE SUB-ASSEMBLY (a) Install a clean hose to the PCV valve sub-assembly. (b) Check the PCV valve sub-assembly operation. (1) Blow air into the cylinder head side, and check that air passes through easily. CAUTION: Do ...