Toyota Tundra Service Manual: Lost Communication with Front Camera Module (U023A)

Toyota Tundra Service Manual / Vehicle Interior / Meter / Gauge / Display / Meter / Gauge System / Lost Communication with Front Camera Module (U023A)

DESCRIPTION

The combination meter assembly communicates with the forward recognition camera via the CAN line.

DTC Code

DTC Detection Condition

Trouble Area

U023A

When either of following conditions is detected:

  • IG voltage 10.5 V or more
  • No communication with forward recognition camera continues for 10 seconds or more

CAN communication system

WIRING DIAGRAM

PROCEDURE

1.

CHECK DTC

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Click here

Result

Proceed to

DTC U023A is not output

A

DTC U023A is output

B

HINT:

If the CAN communication system DTC U023A and another DTC are output at the same time, perform troubleshooting for the CAN communication system DTC U023A first.

A

USE SIMULATION METHOD TO CHECK

B

GO TO CAN COMMUNICATION SYSTEM

    Terminals Of Ecu

    Lost Communication with ECM / PCM "A" (U0100)

    See More:

    Toyota Tundra Service Manual > Sfi System: Startability Malfunction (P1604)
    DESCRIPTION This DTC is stored when the engine does not start even though the STA signal is input or when the engine takes a long time to start, and when the engine speed is low or the engine stalls just after the engine starts. Using the Techstream, the conditions present when the DTC was stored ca ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0103