Toyota Tundra Service Manual: Communication with BODY ECU (Receive) (U0142)

Toyota Tundra Service Manual / Vehicle Interior / Meter / Gauge / Display / Meter / Gauge System / Communication with BODY ECU (Receive) (U0142)

DESCRIPTION

The combination meter assembly communicates with the main body ECU (multiplex network body ECU) via the CAN line.

DTC Code

DTC Detection Condition

Trouble Area

U0142

When either of following conditions is detected:

  • IG voltage 10.5 V or more
  • No communication with main body ECU (multiplex network body ECU) continues for 3 seconds or more

CAN communication system

WIRING DIAGRAM

PROCEDURE

1.

CHECK DTC

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Click here

Result

Proceed to

DTC U0142 is not output

A

DTC U0142 is output

B

HINT:

If the CAN communication system DTC U0142 and another DTC are output at the same time, perform troubleshooting for the CAN communication system DTC U0142 first.

A

USE SIMULATION METHOD TO CHECK

B

GO TO CAN COMMUNICATION SYSTEM

    Lost Communication with Brake System Control Module (U0129)

    Lost Communication with Restraints Control Module (U0151)

    See More:

    Toyota Tundra Service Manual > Navigation System: Navigation Receiver Assembly Power Source Circuit
    DESCRIPTION This circuit provides power to the navigation receiver assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following inspection procedure. PROCEDURE 1. CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMB ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0392