INSTALLATION PROCEDURE 1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror) (a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the "TORX" screw. Torque: 1.2 N·m {12 kgf·cm, 11 in·lbf}
(b) Connect the connector. 2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)
(b) Attach the 2 claws to install the inner rear view mirror stay holder cover as shown in the illustration. 3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror) (a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw. Torque: 1.2 N·m {12 kgf·cm, 11 in·lbf} |
Toyota Tundra Service Manual > Navigation System: Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter
DESCRIPTION The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the navigation receiver assembly via this circuit. The sound signal that has been sent is amplified by the navigation receiver assembly, and then is sent to the speakers. If there is an open or short ...