REMOVAL PROCEDURE 1. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)
(b) Detach the 2 claws and remove the inner rear view mirror stay holder cover. 2. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
(a) Disconnect the connector. (b) Using a T20 "TORX" socket wrench, remove the "TORX" screw and inner rear view mirror. 3. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror) (a) Using a T20 "TORX" socket wrench, remove the "TORX" screw and inner rear view mirror. |
Toyota Tundra Service Manual > Network Gateway Ecu: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: A bolt without a torque specification is shown in the standard bolt chart. Click here PROCEDURE 1. INSTALL NETWORK GATEWAY ECU (a) for Floor Shift Type: (1) Install the network gateway ECU with the 2 nuts. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} (2) Conne ...