Toyota Tundra Service Manual: Removal

Toyota Tundra Service Manual / Vehicle Interior / Other System / Center Power Outlet Socket(for Floor Shift Type) / Removal

REMOVAL

PROCEDURE

1. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

3. REMOVE CONSOLE BOX BEZEL

(a) Disconnect the connector.

(b) Using a screwdriver, detach the 5 claws and remove the console box bezel.

HINT:

Tape the screwdriver tip before use.

Text in Illustration

*1

Protective Tape

4. REMOVE POWER OUTLET SOCKET ASSEMBLY

(a) Using a screwdriver, detach the claw and remove the power outlet socket assembly.

HINT:

Tape the screwdriver tip before use.

Text in Illustration

*1

Protective Tape

5. REMOVE POWER OUTLET SOCKET COVER

(a) Detach the 2 claws and remove the power outlet socket cover.

6. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY (for Double Cab)

7. REMOVE POWER OUTLET SOCKET ASSEMBLY (for Double Cab)

(a) Using a screwdriver, detach the claw and remove the power outlet socket assembly.

HINT:

Tape the screwdriver tip before use.

Text in Illustration

*1

Protective Tape

8. REMOVE POWER OUTLET SOCKET COVER (for Double Cab)

(a) Detach the 2 claws and remove the power outlet socket cover.
    Installation

    Power Outlet Socket(for Crewmax Column Shift Type)

    See More:

    Toyota Tundra Service Manual > Intuitive Parking Assist System: Back Sonar Sensor RH Circuit
    DESCRIPTION The No. 3 ultrasonic sensor sends and receives ultrasonic waves. Based on the received wave, the sensor calculates the approximate distance value between the vehicle and the obstacle, and sends the distance value as a signal to the clearance warning ECU assembly. WIRING DIAGRAM PROCEDURE ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0349