Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL REAR POWER OUTLET SOCKET COVER
2. INSTALL REAR POWER OUTLET SOCKET
3. INSTALL NO. 2 SEATBACK LOCK CONTROL BEZEL (a) Install the No. 2 seatback lock control bezel with the 4 screws. 4. INSTALL NO. 2 CONSOLE BOX REGISTER ASSEMBLY
5. INSTALL NO. 1 CONSOLE BOX REGISTER ASSEMBLY
6. INSTALL CENTER SEATBACK PANEL
Removal REMOVAL PROCEDURE 1. REMOVE CENTER SEATBACK PANEL
2. REMOVE NO. 2 CONSOLE BOX REGISTER ASSEMBLY
3. REMOVE NO. 1 CONSOLE BOX REGISTER ASSEMBLY
4. REMOVE NO. 2 SEATBACK LOCK CONTROL BEZEL
5. REMOVE REAR POWER OUTLET SOCKET
6. REMOVE REAR POWER OUTLET SOCKET COVER
|
Toyota Tundra Service Manual > Sfi System: Throttle / Pedal Position Sensor / Switch "A" Circuit (P0120-P0123,P0220,P0222,P0223,P2135)
DESCRIPTION The TP sensor is mounted on the throttle with motor body assembly, and detects the opening angle of the throttle valve. This sensor is a non-contact type. It uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at high speeds as well as ...