Toyota Tundra Service Manual: Front Radar Sensor (C1A10)

Toyota Tundra Service Manual / Vehicle Interior / Pre-collision / Pre-collision System / Front Radar Sensor (C1A10)

DESCRIPTION

When an internal malfunction is detected in the millimeter wave radar sensor assembly, DTC C1A10 is stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1A10

Front Radar Sensor

When the ignition switch is ON, the millimeter wave radar sensor assembly detects an internal malfunction for approximately 1 second or more.

Millimeter wave radar sensor assembly

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the millimeter wave radar sensor assembly, always replace it with a new one. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle. As a result, a DTC may be stored.
  • If the millimeter wave radar sensor assembly has been replaced, be sure to perform millimeter wave radar sensor assembly adjustment.

    Click here

PROCEDURE

1.

REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY

(a) Replace the millimeter wave radar sensor assembly.

Click here

(b) Adjust the millimeter wave radar sensor assembly.

Click here

NEXT

2.

CLEAR DTC (PRE-COLLISION SYSTEM)

(a) Clear the DTCs.

Click here

NEXT

END
    Stop Light Relay Circuit (C1A4B)

    Front Radar Sensor Incorrect Axial Gap (C1A11)

    See More:

    Toyota Tundra Service Manual > Windshield Deicer System: How To Proceed With Troubleshooting
    CAUTION / NOTICE / HINT HINT: Use these procedures to troubleshoot the windshield deicer system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT 2. INSPECT BATTERY VOLTAGE (a) Measure the battery voltage. Standard Voltage: 11 to 14 V If the voltage is below 11 V, recharge or rep ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0096