DESCRIPTION After installing a new millimeter wave radar sensor assembly, if sensor beam axis adjustment has not been performed, DTC C1A14 will be stored.
CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(a) Perform millimeter wave radar sensor assembly adjustment. Click here
(a) Clear the DTCs. Click here (b) Make sure that the DTC detection conditions are met. HINT: If the detection conditions are not met, the system cannot detect the malfunction. (c) Check for DTCs. Click here
(a) Replace the millimeter wave radar sensor assembly. Click here (b) Adjust the millimeter wave radar sensor assembly. Click here
(a) Clear the DTCs. Click here
|
Toyota Tundra Service Manual > Starter(for 2.0 Kw Type): Removal
REMOVAL PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ). 2. ...