Toyota Tundra Service Manual: Front Camera Module Incorrect Axial Gap (C1AA8)

Toyota Tundra Service Manual / Vehicle Interior / Pre-collision / Pre-collision System / Front Camera Module Incorrect Axial Gap (C1AA8)

DESCRIPTION

If the millimeter wave radar sensor assembly detects that the beam axis of the forward recognition camera is misaligned, it will store DTC C1AA8.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AA8

Front Camera Module Incorrect Axial Gap

The millimeter wave radar sensor assembly continuously receives a signal indicating that the beam axis of the forward recognition camera is misaligned for 1 second or more.

Forward recognition camera system

PROCEDURE

1.

GO TO FORWARD RECOGNITION CAMERA SYSTEM

HINT:

If DTC C1AA8 is output by the pre-collision system, perform troubleshooting for the forward recognition camera system.

Click here

NEXT

END
    Front Camera Module Circuit (C1AA0)

    Front Camera Module Beam Axis Not Adjusted (C1AA9)

    See More:

    Toyota Tundra Service Manual > Engine Immobiliser System (w/o Smart Key System): Registration
    REGISTRATION PROCEDURE 1. NOTICES WHEN REGISTRATION PROCEDURE NOTICE: Make sure to check the items listed below before proceeding with troubleshooting. Do not perform "Immobiliser Code Reset" (all key ID erasure) until all of the malfunctions and symptoms have been confirmed and resolved. ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0326