DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes. (e) Check for DTCs. Click here CLEAR DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Pre-Collision 2 / Clear DTCs. (e) Clear the DTCs. Click here |
Toyota Tundra Service Manual > Front Shock Absorber: Disposal
DISPOSAL PROCEDURE 1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH (a) Fully extend the shock absorber rod. (b) Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside. CAUTION: Be careful when drilling because shards of metal may fly about. Al ...