INSTALLATION PROCEDURE 1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (a) for Manual Seat:
(2) Attach the wire harness clamp.
(4) Attach the 2 hooks of the separate type front seat cushion cover. (b) for Power Seat:
(2) Attach the wire harness clamp and connect the connector.
2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
(b) Connect the connector and attach the connector clamp. 3. INSTALL FRONT SEAT CUSHION SHIELD LH (for Manual Seat, for Driver Side)
4. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat, for Driver Side)
5. INSTALL FRONT SEAT ASSEMBLY (for Power Seat) (See page ) 6. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat) (See page ) 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ). 8. CHECK SRS WARNING LIGHT Click here |
Toyota Tundra Service Manual > Clearance Sonar Main Switch: Components
COMPONENTS ILLUSTRATION *1 BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY *2 COWL SIDE TRIM BOARD LH *3 FRONT DOOR SCUFF PLATE LH *4 INSTRUMENT SIDE PANEL LH *5 LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH *6 NO. 2 SWITCH HOLE BASE ...