INSTALLATION CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. INSTALL FRONT SEAT OUTER BELT ASSEMBLY (a) Align the vehicle's claws with the seat belt retractor positioning holes. (b) Install the seat belt with the 2 bolts. HINT: First install the bolt A, and then install bolt B. Torque: for bolt A : 12.5 N·m {127 kgf·cm, 9 ft·lbf} for bolt B : 42 N·m {428 kgf·cm, 31 ft·lbf}
2. INSTALL CENTER PILLAR GARNISH
3. INSTALL LOWER CENTER PILLAR GARNISH (a) Attach the 7 clips and 2 claws to install the pillar garnish.
4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
6. INSTALL FRONT DOOR SCUFF PLATE
7. INSTALL REAR DOOR SCUFF PLATE
8. INSTALL FRONT SEAT ASSEMBLY (a) for Manual Seat: Install the front seat (see page ). (b) for Power Seat: Install the front seat (see page ). 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 10. CHECK SRS WARNING LIGHT (a) Check the SRS warning light (see page ). |
Toyota Tundra Service Manual > Audio And Visual System: No Sound can be Heard from Speakers
PROCEDURE 1. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY (a) In sound output setting mode, set volume, fader and balance to the initial values and check that the sound is normal. OK: Audio and visual system returns to normal. OK END (SETTINGS ARE DEFECTIVE) NG PROCEED TO NEXT SUSPECTED AREA SHOWN IN P ...