Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL REAR SEAT INNER BELT ASSEMBLY (a) Install the belt with the bolt. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body. 2. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH (a) Install the belt with the bolt. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body. Removal REMOVAL PROCEDURE 1. REMOVE REAR SEAT ASSEMBLY (a) Remove the rear seat (see page ). 2. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH (a) Remove the bolt and belt. 3. REMOVE REAR SEAT INNER BELT ASSEMBLY (a) Remove the bolt and belt. |
Toyota Tundra Service Manual > Navigation System: Speed Signal Malfunction (B15C2)
DESCRIPTION The navigation receiver assembly receives a vehicle speed signal from the combination meter assembly and information from the navigation antenna assembly, and then adjusts the vehicle position. The navigation receiver assembly stores this DTC when the difference between the speed informa ...