INSPECTION PROCEDURE 1. INSPECT REAR SEAT OUTER BELT ASSEMBLY
(b) Check the fastening function of the child restraint system. NOTICE: The check should be performed with the outer belt installed. (1) When the belt is pulled out fully, the belt should automatically start to retract. (2) After the belt has fully retracted, the belt should be able to be pulled out and retracted again. If the operation is not as specified, replace the belt assembly. |
Toyota Tundra Service Manual > Ultrasonic Sensor(for Front Side): Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 1 ULTRASONIC SENSOR (for Steel Type Bumper) (a) Install the No. 1 ultrasonic sensor as shown in the illustration. NOTICE: Do not damage the bumper with the protrusion when installing the No. 1 ultrasonic sensor. 2. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (for S ...