Toyota Tundra Service Manual: Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedures for the LH side and RH side.
  • The procedures listed below are for the LH side.

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY

(a) Remove the rear seat (see page ).

2. REMOVE REAR DOOR SCUFF PLATE

3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

4. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY

(a) Detach the 2 claws and remove the cover.

(b) Remove the bolt and seat belt anchor.

(c) Detach the 6 clips and remove the quarter trim panel.

5. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY

6. REMOVE REAR SEAT OUTER BELT ASSEMBLY

(a) Remove the bolt and shoulder anchor.

(b) Remove the bolt and disconnect the seat belt's shoulder anchor.

(c) Remove the 2 bolts and seat belt.

    Installation

    Seat Belt Warning System

    See More:

    Toyota Tundra Service Manual > Lighting System: Headlight (HI-BEAM) Circuit
    DESCRIPTION The main body ECU (multiplex network body ECU) receives headlight dimmer switch information signals and illuminates the high beam headlights. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure. PR ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0177