Toyota Tundra Service Manual: Touch Panel Switch does not Function

Toyota Tundra Service Manual / Audio, Visual, Telematics / Audio / Video / Audio And Visual System / Touch Panel Switch does not Function

PROCEDURE

1.

CHECK TOUCH PANEL

(a) Check for foreign matter on the display.

OK:

The display is clean.

NG

CLEAN DISPLAY AND RECHECK TOUCH PANEL
OK

2.

CHECK TOUCH SWITCH (OPERATION CHECK)

(a) Enter the "Touch Switch Check" screen. [Refer to Check Touch Switch in Operation Check (See page )]

(b) Touch the display in the area where the switch malfunction occurs.

OK:

A "+" mark appears at the touched position.

Result

Result

Proceed to

OK (for Column Shift Type)

A

OK (for Floor Shift Type)

B

NG

C
A

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

C

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Terminals Of Ecu

    Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164)

    See More:

    Toyota Tundra Service Manual > Vehicle Stability Control System: Test Mode Procedure
    TEST MODE PROCEDURE WARNING LIGHT AND INDICATOR LIGHT INITIAL CHECK (a) When the ignition switch is turned to ON, check that the ABS warning light, brake warning light, TRAC OFF indicator light, VSC OFF indicator light, slip indicator light and AUTO LSD indicator light come on for approximately 3 se ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0116