CUSTOMIZE PARAMETERS PROCEDURE 1. CUSTOMIZE SEAT BELT WARNING SYSTEM HINT: The following items can be customized. NOTICE:
(a) Customizing with the Techstream (1) Connect the Techstream to the DLC3. (2) Turn the ignition switch to ON. (3) Turn the Techstream on. (4) Enter the following menus: Customize Setting / Warning. (5) Select the setting by referring to the table below. Warning
HINT: This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more. |
Toyota Tundra Service Manual > Exterior: Deck Board Rail
Components COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL UPPER HEADER BOARD RAIL (a) Slide the rail in the direction shown in the illustration to install it. (b) Using a T30 "TORX" socket, install the 4 bolts. 2. INSTALL REAR SIDE PANEL TO ...