Toyota Tundra Service Manual: Terminals Of Ecu

Toyota Tundra Service Manual / Vehicle Interior / Seat / Climate Control Seat System / Terminals Of Ecu

TERMINALS OF ECU

1. AIR CONDITIONING AMPLIFIER

(a) Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

J106-9 (SVDB) - Body ground

R - Body ground

Output climate control signal (Driver side)

Ignition switch ON

Seat heater switch LH on

Pulse generation

(see waveform)

J106-10 (SVPB) - Body ground

BE - Body ground

Output climate control signal (Front passenger side)

Ignition switch ON

Seat heater switch RH on

Pulse generation

(see waveform)

(1) Using an oscilloscope, check waveform.

Measurement Condition

Item

Content

Terminal No. (Symbol)

J106-9 (SVDB) - Body ground

J106-10 (SVPB) - Body ground

Tool Setting

2 V/DIV., 500 μsec/DIV.

Condition

Ignition switch ON

Seat heater switch on

2. AIR CONDITIONING CONTROL ASSEMBLY (See page )

    System Diagram

    Front Power Seat Control System(w/ Memory)

    See More:

    Toyota Tundra Service Manual > Front Brake: Reassembly
    REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedures for the LH side and RH side. The procedures listed below are for the LH side. PROCEDURE 1. TEMPORARILY INSTALL FRONT DISC BRAKE BLEEDER PLUG (a) Temporarily install the bleeder plug to the disc brake caliper. HINT: The bleeder plug wil ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0118