DESCRIPTION When a signal is input into the position control ECU and switch assembly, the ECU manages the signals received from the power seat switches, and operates each motors. If the position control ECU and switch assembly receives more than 2 motors operation signals, the motor is stopped. Manual operation is restarted after the position control ECU and switch assembly receives 1 signal only. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following inspection procedure. PROCEDURE
(a) Check that each function of the power seat operates normally by using the power seat switches (See page ). Result
(b) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
Toyota Tundra Service Manual > Audio And Visual System: Noise Occurs or Sound Skips when Portable Player Plays
CAUTION / NOTICE / HINT HINT: Perform this check with the portable player volume set at an appropriate level. Make sure there are no obstructions between the portable player and radio and display receiver assembly that may block signals, and that the portable player and radio and display receiver as ...