Toyota Tundra Service Manual: Inspection

Toyota Tundra Service Manual / Vehicle Interior / Seat / Front Seat Cushion Heater(for Power Seat) / Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH

(a) Check the resistance of the front seat cushion heater assembly LH.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

3 - 5

Seat cushion heater temperature 23°C (73°F)

2.89 to 3.53 Ω

If the result is not as specified, replace the front seat cushion heater assembly LH.

Text in Illustration

*a

Component without wire harness connected

(Front Seat Cushion Heater Assembly LH)

2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

(a) Check the resistance of the front seat cushion heater assembly RH.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

3 - 5

Seat cushion heater temperature 23°C (73°F)

2.89 to 3.53 Ω

If the result is not as specified, replace the front seat cushion heater assembly RH.

Text in Illustration

*a

Component without wire harness connected

(Front Seat Cushion Heater Assembly RH)
    Components

    Installation

    See More:

    Toyota Tundra Service Manual > Meter / Gauge System: Lost Communication with ECM / PCM "A" (U0100)
    DESCRIPTION The combination meter communicates with the ECM via the CAN line. DTC Code DTC Detection Condition Trouble Area U0100 When either of following conditions is detected: Vehicle speed 5 km/h (3 mph) or more and IG voltage 10.5 V or more No communication with ECM continues for 3 seconds or m ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0266