Toyota Tundra Service Manual: Inspection

Toyota Tundra Service Manual / Vehicle Interior / Seat / Front Seatback Heater(for Power Seat) / Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH

(a) Check the resistance of the front seatback heater assembly LH.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Seatback heater temperature 23°C (73°F)

4.16 to 5.08 Ω

If the result is not as specified, replace the front seatback heater assembly LH.

Text in Illustration

*a

Component without wire harness connected

(Front Seatback Heater Assembly LH)

2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH

(a) Check the resistance of the front seatback heater assembly RH.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Seatback heater temperature 23°C (73°F)

4.16 to 5.08 Ω

If the result is not as specified, replace the front seatback heater assembly RH.

Text in Illustration

*a

Component without wire harness connected

(Front Seatback Heater Assembly RH)
    Components

    Installation

    See More:

    Toyota Tundra Service Manual > Airbag System: Seat Position Airbag Sensor Circuit Malfunction (B1653)
    DESCRIPTION The seat position airbag sensor circuit consists of the airbag sensor assembly and seat position airbag sensor. DTC B1653 is stored when a malfunction is detected in the seat position airbag sensor circuit. DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0338