REMOVAL CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT:
PROCEDURE 1. REMOVE FRONT SEAT ASSEMBLY LH (See page ) 2. REMOVE FRONT SEAT CUSHION SHIELD LH
3. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD LH
4. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER
6. REMOVE SEPARATE TYPE FRONT SEATBACK PAD
7. REMOVE FRONT SEATBACK WIRE LH (for Driver Side)
8. REMOVE FRONT SEATBACK WIRE RH (for Front Passenger Side)
9. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH
10. REMOVE FRONT SEATBACK HOOK (a) Remove the 2 front seatback hooks from the lumbar support adjuster assembly LH. 11. REMOVE SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)
|
Toyota Tundra Service Manual > Vehicle Stability Control System: Low Power Supply Voltage Malfunction (C1241)
DESCRIPTION If a malfunction is detected in the power supply circuit, the skid control ECU (brake actuator assembly) stores this DTC and the fail-safe function prohibits ABS operation. This DTC is stored when the +BS terminal voltage meets one of the DTC detection conditions due to a malfunction in ...