Toyota Tundra Service Manual: Removal

Toyota Tundra Service Manual / Vehicle Interior / Seat / Power Seat Switch(w/o Seat Position Memory System) / Removal

REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

(See page )

2. REMOVE FRONT SEAT CUSHION SHIELD LH

3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

4. REMOVE RECLINING POWER SEAT SWITCH KNOB

5. REMOVE FRONT POWER SEAT SWITCH LH

(a) Remove the 3 screws and front power seat switch LH.
    Installation

    Rear Seat Assembly(for Crewmax Lh Side)

    See More:

    Toyota Tundra Service Manual > Propeller Shaft Assembly(for 4wd): Inspection
    INSPECTION CAUTION / NOTICE / HINT PROCEDURE 1. INSPECT PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY (a) Using a dial indicator, measure the intermediate shaft runout. Maximum runout: 0.61 mm (0.0240 in.) If the intermediate shaft runout is more than the maximum, replace the propeller shaft with cen ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0266