INSTALLATION PROCEDURE 1. INSTALL REAR SEAT ASSEMBLY
2. INSTALL REAR SEAT INNER BELT ASSEMBLY
3. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
4. INSTALL SEAT FLOOR BOX (w/ Seat Under Tray) (a) Attach the claw to install the seat floor box. (b) Install the 4 knobs. 5. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Seat Under Tray)
(b) Close the luggage compartment side cover sub-assembly RH and turn the knob. 6. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Seat Under Tray)
(b) Close the luggage compartment side cover sub-assembly LH and turn the knob.
|
Toyota Tundra Service Manual > Ignition System: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. PERFORM SPARK TEST (a) Check for DTCs (See page ). NOTICE: If any DTC is present, perform troubleshooting procedures for that DTC. (b) Check if sparks occur. (1) Remove the ignition coils and spark plugs (See page ). (2) Install the spark plug to the ignition coil ...