Components COMPONENTS ILLUSTRATION Installation INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT:
PROCEDURE 1. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY LH (a) Attach the clamp to install the seat heater control sub-assembly LH. (b) Connect the connector. 2. INSTALL FRONT SEAT ASSEMBLY (a) for Power Seat: (See page ) Removal REMOVAL CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT:
PROCEDURE 1. REMOVE FRONT SEAT ASSEMBLY (a) for Power Seat: (See page ) 2. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY LH
(b) Detach the clamp to remove the seat heater control sub-assembly LH. |
Toyota Tundra Service Manual > Cylinder Head: Replacement
REPLACEMENT PROCEDURE 1. REPLACE INTAKE VALVE GUIDE BUSH (a) Heat the cylinder head to approximately 80 to 100°C (176 to 212°F). (b) Place the cylinder head on wooden blocks. (c) Using SST and a hammer, tap out the valve guide bush. SST: 09201-10000 09201-01050 SST: 09950-70010 09951-07100 (d) Usi ...