Inspection INSPECTION PROCEDURE 1. INSPECT SEAT VARIABLE CUSHION SWITCH
Installation INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. HINT: A bolt without a torque specification is shown in the standard bolt chart (See page ). PROCEDURE 1. INSTALL SEAT VARIABLE CUSHION SWITCH (a) Install the seat variable cushion switch with the 2 screws. (b) Connect the connector. 2. INSTALL FRONT SEAT CUSHION SHIELD LH
3. INSTALL FRONT SEAT ASSEMBLY LH (See page ) Removal REMOVAL CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. PROCEDURE 1. REMOVE FRONT SEAT ASSEMBLY LH (See page ) 2. REMOVE FRONT SEAT CUSHION SHIELD LH
3. REMOVE SEAT VARIABLE CUSHION SWITCH
(b) Remove the 2 screws and seat variable cushion switch. |
Toyota Tundra Service Manual > Sfi System: Terminals Of Ecm
TERMINALS OF ECM 1. CHECK ECM (a) Measure the voltage according to the value(s) in the table below. HINT: The standard voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks shoul ...