INSTALLATION PROCEDURE 1. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 12 Speakers) (a) Connect the connector. (b) Temporarily install the front No. 4 speaker assembly by aligning the positioning pins of the front No. 4 speaker assembly with the instrument panel. (c) Install the front No. 4 speaker assembly with the 2 bolts. Torque: 3.5 N·m {36 kgf·cm, 31 in·lbf} NOTICE:
2. INSTALL NO. 1 SPEAKER HOLE COVER (a) Attach the 8 clips to install the No. 1 speaker hole cover. 3. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY RH (a) Connect the connector. (b) Temporarily install the front No. 2 speaker assembly RH by aligning the positioning pins of the front No. 2 speaker assembly RH with the instrument panel. (c) Install the front No. 2 speaker assembly RH with the 2 bolts. Torque: 3.5 N·m {36 kgf·cm, 31 in·lbf} NOTICE:
4. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY LH (a) Connect the connector. (b) Temporarily install the front No. 2 speaker assembly LH by aligning the positioning pins of the front No. 2 speaker assembly LH with the instrument panel. (c) Install the front No. 2 speaker assembly LH with the 2 bolts. Torque: 3.5 N·m {36 kgf·cm, 31 in·lbf} NOTICE:
5. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (a) Attach the 2 guides, 3 clips and 3 claws to install the No. 2 instrument panel speaker panel sub-assembly. 6. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (a) Attach the 2 guides, 3 clips and 3 claws to install the No. 1 instrument panel speaker panel sub-assembly. 7. INSTALL FRONT PILLAR GARNISH RH
8. INSTALL FRONT PILLAR GARNISH LH
|
Toyota Tundra Service Manual > Automatic Transmission Unit: Inspection
INSPECTION PROCEDURE 1. INSPECT AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY (a) Remove the magnets, and use them to collect steel particles. (b) Carefully look at the foreign matter and particles in the pan and on the magnets to anticipate the type of wear you will find in the transmission. Steel (m ...