DESCRIPTION If the sliding function and tilt function do not operate, there may be a malfunction in the sliding roof ECU power source circuit. WIRING DIAGRAM 
CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure. PROCEDURE
(a) Use the Data List to check if the ignition switch signal is functioning properly. Click here
OK: The Techstream displays as shown in the table according to the operation of each switch.
(a) Disconnect the W3 ECU connector. (b) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
Toyota Tundra Service Manual > Sfi System: Brake Override System
DESCRIPTION When the vehicle is being driven, depressing the accelerator pedal sensor assembly and brake pedal will activate the brake override system to restrict driving torque. The conditions for activating the brake override system as well as the items that are controlled are explained below. Act ...
