CHECK MODE PROCEDURE CHECK MODE (SIGNAL CHECK): DTC CHECK (a) Turn the ignition switch off. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch to ON. (d) Turn the Techstream on. (e) Select "Signal Check" and proceed with checking using the Techstream. NOTICE: Select Signal Check on the Techstream to clear the DTCs (both current and history). HINT:
|
Toyota Tundra Service Manual > Front Airbag Sensor: Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the LH and RH sides. The procedure listed below is for the LH side. PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore ...