Toyota Tundra Service Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

(a) When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

OK:

Malfunction disappears.

HINT:

• Connect the connectors to the front No. 2 speaker assemblies.
• When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.
• Perform the inspection above on both the LH and RH sides.

2. INSPECT FRONT NO. 4 SPEAKER ASSEMBLY (for 7 Speakers)

(a) Temporarily replace the front No. 4 speaker assembly with a new or normally functioning one.

OK:

Malfunction disappears.

HINT:

Connect the connectors to the front No. 4 speaker assembly.