Toyota Tundra Service Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 7 Speakers)

(a) Connect the connector.

(b) Temporarily install the front No. 4 speaker assembly by aligning the positioning pins of the front No. 4 speaker assembly with the instrument panel.

(c) Install the front No. 4 speaker assembly with the 2 bolts.

Torque:

3.5 N·m {36 kgf·cm, 31 in·lbf}

NOTICE:

  • Do not touch the cone part of the speaker.
  • When installing the speaker to the instrument panel, be careful so that the wires do not get caught between the parts.

2. INSTALL NO. 1 SPEAKER HOLE COVER

(a) Attach the 8 clips to install the No. 1 speaker hole cover.

3. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY RH

(a) Connect the connector.

(b) Temporarily install the front No. 2 speaker assembly RH by aligning the positioning pins of the front No. 2 speaker assembly RH with the instrument panel.

(c) Install the front No. 2 speaker assembly RH with the 2 bolts.

Torque:

3.5 N·m {36 kgf·cm, 31 in·lbf}

NOTICE:

  • Do not touch the cone part of the speaker.
  • When installing the speaker to the instrument panel, be careful so that the wires do not get caught between the parts.

4. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY LH

(a) Connect the connector.

(b) Temporarily install the front No. 2 speaker assembly LH by aligning the positioning pins of the front No. 2 speaker assembly LH with the instrument panel.

(c) Install the front No. 2 speaker assembly LH with the 2 bolts.

Torque:

3.5 N·m {36 kgf·cm, 31 in·lbf}

NOTICE:

  • Do not touch the cone part of the speaker.
  • When installing the speaker to the instrument panel, be careful so that the wires do not get caught between the parts.

5. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

(a) Attach the 2 guides, 3 clips and 3 claws to install the No. 2 instrument panel speaker panel sub-assembly.

6. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

(a) Attach the 2 guides, 3 clips and 3 claws to install the No. 1 instrument panel speaker panel sub-assembly.

7. INSTALL FRONT PILLAR GARNISH RH

8. INSTALL FRONT PILLAR GARNISH LH

    Inspection

    Removal

    See More:

    Toyota Tundra Service Manual > Brake Pedal: Removal
    REMOVAL PROCEDURE 1. REMOVE PRECAUTION NOTICE: After turning the ignition switch off, waiting time be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ). ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0105