INSTALLATION PROCEDURE 1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY (a) Install the curtain shield airbag with the 8 bolts. Torque: 11 N·m {112 kgf·cm, 8 ft·lbf} NOTICE: Do not twist the curtain shield airbag when installing it. (b) Connect the connector. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness. 2. INSTALL ROOF HEADLINING ASSEMBLY Click here 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Click here 4. CHECK SRS WARNING LIGHT Click here |
Toyota Tundra Service Manual > Lighting: High Mounted Stop Light Assembly
Components COMPONENTS ILLUSTRATION ILLUSTRATION Disassembly DISASSEMBLY PROCEDURE 1. REMOVE CENTER STOP LIGHT BULB (a) Turn the center stop light bulb sockets with the center stop light bulb in the direction indicated by the arrow to remove them as a unit. (b) Remove the center stop light bulb from ...