Toyota Tundra Service Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

(a) Perform a diagnostic system check (see page ).

(b) With the curtain shield airbag installed on the vehicle, perform a visual check. If any of the defects mentioned below are present, replace the curtain shield airbag with a new one:

Cuts, minute cracks or marked discoloration on the curtain shield airbag.

2. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

(a) Perform a diagnostic system check (see page ).

(b) With the curtain shield airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the curtain shield airbag with a new one:

  • Cuts, minute cracks or marked discoloration on the curtain shield airbag.
  • Cracks or other damage to the connectors.

    CAUTION:

    For removal and installation procedures of the curtain shield airbag, be sure to follow the correct procedure.

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Lane Departure Alert System: Diagnostic Trouble Code Chart
    DIAGNOSTIC TROUBLE CODE CHART LANE DEPARTURE ALERT SYSTEM DTC No. Detection Item Link C1A47 Steering Angle Sensor C1AA0 Front Camera Module Circuit C1AA1 FCM Destination Information Unmatched C1AA2 Vehicle Speed Tolerance Malfunction C1AA3 Vehicle Speed Sensor Circuit C1AA4 Yaw Rate Sensor Circuit C ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0324